Fremont has more industrial land than most people expect. Warm Springs, the Bayside area west of the freeway and the blocks around the rail lines hold factories, warehouses, labs, truck yards and equipment lots. These sites need a fence that marks the line clearly, controls who drives in, and stands up to daily use. We install chain link in standard and heavier gauges, ornamental steel for the street side, privacy slats and screening, and slide and swing gates with operators.
The city's fence chapter has specific rules for these properties. Fremont Municipal Code 18.171.050 allows an open fence up to 10 feet in a rear or side yard that does not face a street on commercial and industrial lots. Barbed wire and other sharp material must be at least 8 feet above the ground. An electric security fence is allowed in industrial zones only when it stands at least 3.5 feet behind a non-energized perimeter fence at least 6 feet tall. Anything over 7 feet needs a building permit.
Ground conditions on the bay side matter for a long commercial run. The clay there holds water and moves with the seasons, and a slide gate needs a level, stable track or it binds. We look at drainage, truck turning paths and where the power for an operator will come from during the first visit. We place the 811 ticket ourselves and ask for a site plan showing your private lines, since yard lighting, fire lines and data conduit are yours, not the utilities'.
Commercial & security fencing in Fremont: common questions
How tall can a commercial fence be in Fremont?
On commercial and industrial lots, Fremont Municipal Code 18.171.050 allows an open fence up to 10 feet in a side or rear yard that does not abut a street. Other yards follow the general limits. Fences over 7 feet need a building permit. We confirm the limit for your parcel with the Planning Division.
Is barbed wire or electric fence allowed?
Not in residential zones. Elsewhere, barbed wire and sharp-pointed material must be at least 8 feet above ground level. In industrial zones an electric fence may be lower only if it is set at least 3.5 feet behind a 6-foot non-energized perimeter fence.
Can you keep our yard open while the fence is replaced?
Usually. We build in sections and plan gate work around your truck and shift times. Tell us your hours and which entrances cannot close, and we set the order of work to suit.
How it works
- Free estimate: Call, text or book online. We visit, measure and talk through options.
- Written quote: Clear pricing with material choices side by side.
- Permits & planning: We check local rules and help with permits before we dig.
- Install & clean-up: Our crew installs, cleans up and walks the finished fence with you.